KS5000 · EPDM
Built for repeated sterilization.为反复灭菌而设计。
A one-piece injection-molded EPDM glove combining heat resistance, oxidizer resistance and broad chemical compatibility for demanding isolator service.一体注射成型 EPDM 手套，兼具耐热、耐氧化剂和广泛化学兼容性，适用于高要求隔离器工况。
−50 to 135°Cservice temperature使用温度
Up to 150autoclave cycles次高压蒸汽灭菌
15 / 24 / 30 milthickness options厚度选项
7 / 8 / 9 / 10 inport sizes手套口尺寸
Process compatibility工艺兼容性
Heat and oxidizer resistance with useful flexibility.耐热、耐氧化剂，同时保持实用柔韧性。
Suitable sterilization methods include VHP / hydrogen peroxide, peracetic acid, gamma irradiation and repeated autoclaving under validated process conditions.适用灭菌方式包括 VHP / 过氧化氢、过氧乙酸、伽马辐照以及经验证工艺条件下的反复高压蒸汽灭菌。
VHP / H₂O₂Peracetic acid过氧乙酸GammaAutoclave高压蒸汽
- Strong acids, alkalis and oxidizers强酸、强碱与氧化剂
- Alcohols, ketones and esters醇、酮及酯类
- Black or white color options黑色或白色可选
- FDA 21 CFR 177.2600
Technical specification技术规格
KS5000 EPDM
| Construction结构 | One-piece injection molded; 9-A ambidextrous configuration一体注射成型；9-A 双手通用结构 |
|---|---|
| Port size手套口尺寸 | 7, 8, 9, 10 in |
| Length长度 | 32 in / 800 mm |
| Thickness厚度 | 15 / 24 / 30 mil · 0.40 / 0.60 / 0.80 mm |
| Beading卷边 | > 5 mm |
| Shelf life保质期 | 5 years under specified storage conditions在规定储存条件下 5 年 |
Cycle count and compatibility are application-dependent. Validate the glove in the final process.灭菌循环次数与兼容性取决于具体应用，请在最终工艺中进行验证。